[INCH-POUND]
A-A-52121
March 15, 1993
COMMERCIAL ITEM DESCRIPTION
CABINET, DOUGH-PROOFING (18 PAN CAPACITY)
The General Services Administration has authorized the use of this commercial item description in preference to W-C-20.
1. ABSTRACT
1.1 Abstract. This commercial item description covers a mobile dough-proofing cabinet of one type and size with an electrically heated humidifier.
2. SALIENT CHARACTERISTICS
2.1 Design and construction. The dough-proofing cabinet shall be fabricated of aluminum alloy or 300 series stainless steel. The cabinet shall accommodate a minimum of 18 pastry pens having nominal overall dimensions of 18 inches by 26 inches. The ledges or guide which support the pens shall be spaced a minimum 3 inches apart. The cabinet shall be equipped with a removable electrically heated humidifier located in the bottom of the cabinet. The humidifier shall be capable of maintaining 85 to 100 percent relative humidity with a cabinet temperature of 95°F to 120°F. An automatic thermostat shall control the temperature of the water. An 18-hour timer graduated in 1-hour intervals shall be furnished with the unit. The cabinet shall be provided with four 5-inch diameter (minimum) removable casters. Two of the casters shall be equipped with foot brakes. The door must be able to open a minimum 180 degrees and shall have a thermometer mounted on the outside to indicate the air temperature inside the proofing cabinet without opening the door. The door shall be kept closed by means of a gravity door latch or similar. Two handles, one on each side of the cabinet, shall be mounted at a convenient height for moving and lifting of the cabinet. The proofing cabinet shall be equipped with corner bumpers.
|
Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any other data which may improve this document should be sent by letter to: Commander, U.S. Army Natick Research, Development, and Engineering Center, ATTN: SATNC-WEE, Natick, MA 01760-5018. |
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business