A-A-50107
March 31, 1987
COMMERCIAL ITEM DESCRIPTION
DOLLY, FOOD HANDLING EQUIPMENT (DISHWASHING RACKS)
The General Services Administration has authorized the use of this commercial item description in preference to MIL-D-63442.
1. SALIENT CHARACTERISTICS.
1.1 Material, design, and construction. The dolly shall be fabricated from either stainless steel or aluminum alloy. The dolly shall be designed for transporting nominal 20-inch by 20 inch dishwashing racks. The dolly shall be capable of transporting a load of 250 pounds without any visible deformation. The dolly base shall have a minimum 3/4-inch lip on all four sides to prevent racks from sliding off. The inside dimensions shall be no less than 20-1/4 inches and no more than 20-3/4 inches. The overall height, excluding handle, shall not exceed 12 inches.
1.1.1 Casters. The dolly shall be provided with four 5-inch diameter swivel casters suitable for the load specified.
1.1.2 Bumpers. The dolly shall be equipped with bumpers to protect walls from damage by any side or corner of the dolly. There shall be no evidence of deformation, separation, or failure of the bumpers and dolly when the dolly is propelled against a vertical rigid wall at a speed of 30 feet in 10 seconds.
1.1.3 Handle. The dolly shall be equipped with a removable tubular handle. The handle shall be fabricated of material having a minimum 1-inch outside diameter, with a minimum wall thickness of .062 inch. The overall height, including handle shall be no less than 33 inches and no more than 40 inches.
1.2 Standards compliance. Dollies shall comply with the sanitation requirements of the National Sanitation Foundation Standard No. 2.
1.3 Data name plate (Government unique requirement see 4.4).
The dolly shall be furnished with a name plate in accordance with the applicable requirements of MIL-STD-130 except the requirement for; (a) Method of applying, (b) Identification tags, (c) Information not required and (d) Optional marking information shall apply. The data name plate shall be made of minimum 20-gauge corrosion-resisting metal and attached to the dolly by rivets, by screws, or by welding in such manner as to meet the applicable NSF sanitary requirements for this equipment. The plate shall contain the following information which shall be stamped, engraved, or applied by photosensitive means:
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business