A-A-50127A
2.1 Certification. The contractor shall certify, and maintain substantiating evidence, that the product offered meets the salient characteristics and requirements of this Commercial Item Description, and that the product conforms to the producer's own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
2.2 Visual examination. Each lot of ascenders shall be inspected in accordance with MIL-STD-105. The inspection level shall be II and the acceptable quality level (AQL), expressed in terms of defects per hundred units, shall be 4.0. The lot size shall be expressed in units of ascenders. The sample unit shall be one ascender. The ascenders shall be examined for the defects listed below:
Color not as specified, finish not smooth and adherent; not free of burrs, rough spots, sharp edges, slivers, flat areas or projections; rivets shall be tight and properly peened. any component missing or not specified type; any component fractured, split, dented, bowed, malformed, damaged or loose; markings in wrong location, incomplete, illegible, incomplete, or not as specified.
2.3 Dimensional examination. The ascenders shall be examined without damaging or disassembling the ascenders. Any dimension not within the specified tolerances shall be classified as a defect. The lot size shall be expressed in units of ascenders. The sample unit shall be one ascender. The inspection level shall be S-3 and the AQL, expressed in terms of defects per hundred units, shall be 2.5.
1. PACKAGING
3.1 Preservation. Two ascenders, a right and a left hand, shall be matched and inserted into a close-fitting clear polyethylene bag. The bag shall be fabricated from a minimum 0.001 inch material and sealed either with a heat seal or taped.
3.2 Packaging. Eight pairs of ascenders shall be packaged in a snug-fitting intermediate box fabricated from 200-pound test corrugated fiberboard.
3.3 Packing. Forty-eight pairs of ascenders packaged as specified, shall be packed in a snug-fitting RSC style corrugated fiberboard shipping container conforming to type CF, class domestic, grade 275 of PPP-B-636. The shipping containers shall be completely filled with no voids and of a size that can be palletized in accordance with MIL-STD-147. Each shipping container shall be closed in accordance with the appendix of PPP-B-636.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business