A-A-52196
3.3 Rack dimensions. The maximum overall height of the rack including casters, shall be 64-1/2 inches. The maximum width of the rack shall be 24-1/4 inches, and the maximum depth of the rack shall be 26-1/2 inches. These dimensions shall exclude the perimeter bumper thickness.
2.3 Hardware. All hardware shall be metal and of the corrosion resistant type.
2.4 Casters. The rack shall be equipped with four heavy-duty, minimum 5 inch diameter, swivel type caster, rubber or plastic tires, with a minimum tread width of 1-1/4 inches. Two of the casters diagonally opposite each other, shall be equipped with a foot brake.
2.5 Bumpers. The base of the mobile rack (frame) shall be provided with a metal reinforced wraparound rubber or plastic perimeter bumper, having a nominal thickness of 1 inch. The bumper may be segmented or continuous.
2.6 Stability. The mobile rack shall be rigid and non-flexible when fully loaded for use. Stabilizing rods or brackets may be provided as per the manufacturer’s standard assembly method.
2.7 Standard compliance. The mobile rack assembly shall comply with the requirements of NSF International Standard No.2.
2.8 Data nameplate. The mobile rack assembly shall be furnished with a data nameplate of the permanent stick-on type, or a metal name plate riveted or soldered in place with the following information:
National Stock Number
Procurement Contract Number
CID No. and Item Name
Manufacturer’s Name, Address, and Telephone Number
Supplier’s Name, Address, and Telephone Number (List Only if Different from Manufacturer)
Manufacturer’s Model Number
The data nameplate shall be placed on one of the mobile rack frame members so that it is readily visible to the user.
2.9 Workmanship. The finished mobile rack shall be the complete standard product as normally provided to the commercial marketplace.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business