Refrigerators shall conform to the applicable requirements of ANSI/UL250. Acceptable evidence of meeting the requirements of this standard shall be the UL label,-UL listing mark, or a certified test report from a recognized independent testing laboratory acceptable to the Government, indicating that the refrigerator offered has been tested and conforms to the applicable requirements of the UL standard.
The refrigerators shall include an adjustable temperature control, an automatic interior light with shield, a minimum of two copolymer, polyethylene plastic or metal/partial metal ice cube trays, an interior metal or acrylonitrile butadiene styrene (ABS) plastic freezer door with metal hinges, a manual defrost feature, a minimum of two adjustable leg levelers and be free standing.
The refrigerator shall have a counter top of plastic and/or plastic laminated on wood.
Each door shall be equipped with a magnetic gasket and unless otherwise specified, doors shall swing to the right. A right-hand swing shall be described as having hinges located on the right side door when facing the refrigerator.
The outer shall (including the door) be carbon-steel sheet finished in baked synthetic enamel.
The inner liners if the general storage area shall be carbon steel sheet or molded plastic. The carbon steel sheet inner liners shall have porcelain enamel or baked synthetic enamel finish. The color shall be white or pastel.
The insulation for the cabinet and door must be foamed-in-place polyurethane foam insulation. When plastic liners are used in the general storage compartment and the exterior door and the insulation is foamed-in-place polyurethane employing fluorinated hydrocarbons, the liner material must be made of (ABS).
Plastic compartment liners and plastic door liners when assembled to outer doors, shall not show any cracks or crazing when tested under Environmental Cracking Resistance Test specified in ANSI/AHAM HRF-1.
Workmanship. welding and brazing shall be complete, uniform, and properly fused having no burn holes, slag inclusion, scale or flux deposits and shall not be cracked, fractured, or undercut. Soldering shall be complete, clean, adherent, without pinholes. Bolts, nuts, screws, studs, and other types of fasteners, when used shall not be broken, fractured, stripped, or loose and shall have lock washers or shall be self-locking type when used on structural parts subject to vibrations.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business