A-A-50023A
2.4 Data name plate (Government unique requirement see 5.4). The saw shall be furnished with a data name plate in accordance with the applicable requirements of MIL-STD-130 except the requirements for: Methods of applying; (b) Identification tags; (c) Information not required and (d) Optional marking information shall not apply. The data plate shall be made of minimum 20 gauge corrosion-resisting metal and attached to the saw by rivets, screws, or welding in such a manner as to meet the applicable National Sanitation Foundation sanitary requirements for this equipment. The plate shall contain the following information which shall be stamped, engraved or applied by photosensitive means:
National Stock Number
Procurement Contract Number
Specification Data
Manufacturer’s Name, Address and Telephone Number
Supplier’s Name, Address and Telephone Number (List only if different from
Manufacturer)
Manufacturer’s Model Number
Government Approved Manual Number (when specified, see 5.2)
Each plate shall be placed ‘so that it is readily visible to the operator during normal operating use and so as to not adversely affect the life and utility of the saw.
3. QUALITY ASSURANCE
3.1 Certification. The contractor shall certify that the product offered meets the salient characteristics and requirements of the description and except for those government unique requirements specified, conforms to the producer’s own drawings, specifications, standards, and quality assurance practices, and is the same as the product offered for sale in the commercial marketplace. The contractor shall certify the product meets the “Government unique” requirements except when specific quality assurance provisions are specified for the Government unique requirements. In this case, the contractor shall provide data resulting from inspection conducted in accordance with the specified quality assurance. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
4. PACKAGING
4.1 Packaging and packing. Packaging and packing shall be commercial or export as specified (see 5.2).
4.2 Commercial packaging and packing. Each saw shall be cleaned, preserved, packaged, packed and unitized in accordance with ASTM D 3951.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business