A-A-50027B
September 2, 1988
SUPERSEDING
A-A-50027A
April 15, 1988
COMMERCIAL ITEM DESCRIPTION
MEAT TENDERIZER, ELECTRIC
The General services Administration has authorized the use of this commercial item description in preference to military specification MIL-M17312.
1. CLASSIFICATION
1.1 Classification. This commercial item description covers two types of meat tenderizers as follows:
Type I – 120 volts, 60 hertz, single phase
Type – 220 volts, 50 hertz, single phase
1.2 Part identification number. The part identification number shall consist of the commercial item description number and the type number as follows:
A-A-50027 – 1
A-A-50027 = CID number
1 = Type
2. SALIENT CHARACTERISTICS
2.1 Description. The meat tenderizer shall be driven by a minimum of 1/2 horsepower motor equipped with thermal overload. The motor and drive shall be enclosed in a stainless steel or aluminum housing. The cutting knife assembly shall be enclosed in a removable, transparent, high impact plastic cover. The meat tenderizer shall consist of a steel or aluminum base and frame. The removable cover shall have a feed opening slot to accept a 1 inch thick by 7 inch wide piece of meat. An integral safety switch shall be provided to prevent the machine from operating when the cover is in the open position. The cutting knife assembly and tines or stripper shall be stainless steel and easily removed from the tenderizer as a unit for cleaning and servicing. The meat tenderizer shall be equipped with a double pole, on-off switch, with a minimum 1 horsepower rating. The meat dispensing chute shall be not less than 5 inches above the working surface. The maximum overall dimensions shall be 20 inches wide by 16 inches deep by 22 inches high.
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business