A-A-0031A
2.1.1 Cutting dies. The cookie cutting machine shall be furnished with cutting dies for use in the unit being supplied, of the types and quantities as follows:
|
Type of cutting die |
Quantity |
|
4 round openings, 2 1/2 inches diameter |
1 |
|
4 scalloped round openings, 2 l/2 inches in diameter |
1 |
|
4 rectangular openings, 1 1/4 by 2 1/4 inches |
1 |
|
6 round openings, 1 inch in diameter |
1 |
2.1.2 Maximum dimensions. The cookie cutting machine shall not exceed the following overall dimensions:
72 inches in length
40 inches in width
60 inches in height
2.2 Data name plate. The cookie cutting machine shall be furnished with a data name plate in accordance with the applicable requirements of MIL-STD-130 except, the requirement for; (a) Methods of applying, (b) Identification tags, (c) Information not required, and (d) Optional marking information shall not apply. The data plate shall be made of minimum 20 gauge corrosion resisting metal and attached to the unit by rivets, screws or by welding, in such a manner as to meet the applicable NSF requirements for this machine. The plate shall bear the following information which shall be stamped, engraved, or applied by photosensitive means:
National Stock Number
Procurement Instrument Identification Number
Specification Data
Manufacturer’s Name, Address, and Telephone Number
Supplier’s Name, Address, and Telephone Number (List only if different from Manufacturer)
Manufacturer’s Model Number
Government Approved Manual Number (see 5.1).
Each plate shall be placed so that it is readily visible to the operator during normal operating “se and so as to not adversely affect the life or utility of the item.
3. Quality assurance.
3.1 Certification. The contractor shall certify that the product offered meets the salient characteristic of this description, conforms to the producer’s own drawings, specifications, standards, and quality assurance practices, and is the same as the product sold in the commercial marketplace. The government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under provisions of the contract.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business